-
The RAM Mounts EZ-Roll'r cradle for the iPad Pro secures your device in a form-fit holder that keeps the entire screen visible. Designed for tablets that are not in a case, the EZ-Roll'r for the iPad Pro features a holder for the Apple Pencil as well. Simply slide the tablet into the bottom cups and then roll the top clip over the top of the device to anchor it into the cradle. Side buttons, charging port and camera lens are conveniently exposed and accessible while in the EZ-Roll'r cradle. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. -
The metal u-bolt accommodates rails in diameter from 0.5" to 1.25" in diameter. Included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5". -
The RAM-B-380-A-125BU consists of a yoke clamp base, SHORT double socket arm and curved angle plate. The yoke clamp base is designed with the Pilatus PC-12NG in mind; however, if your aircraft yoke has an outer diameter within the compatible range, this product will fit your yoke. The yoke clamp base will accommodate an outer diameter range of 1.25" 1.625". The curved angle plate is 2.5" square with pre-drilled holes for many different screw hole patterns, including the universal AMPS hole pattern and all RAM made cradles. The connection section extends approximately 2.25" forward, at a 45 degree angle, from the center of the 1" ball and approximately 1.5" above the 1" ball (to the bottom of the connection section of the plate). -
The RAM-B-380U consists of a 1" rubber ball connected to a yoke clamp base. The yoke clamp base is designed with the Pilatus PC-12NG in mind; however, if your aircraft yoke has an outer diameter within the compatible range, this product will fit your yoke. The yoke clamp base will accommodate an outer diameter range of 1.25" 1.625". -
The RAM-B-121BAU, yoke clamp mount with 1/4"-20 thread, will fit rails from 0.625" to 1.25" in diameter. The 1" rubber ball is set at a right angle to the plane of the mount, so when connected to a rail, the ball sits parallel to the rail. -
The yoke clamp base will fit rails in diameter from 0.625" to a maximum of 1.25". The 1" rubber ball is at a right angle to the plane of the mount; when connected to a rail, the ball sits parallel to the rail. -
The yoke clamp base will fit rails in diameter from 0.625" to a maximum of 1.25". The 1" rubber ball is at a right angle to the plane of the mount; when connected to a rail, the ball sits parallel to the rail. -
Optional Tether Included Cradle Dimensions: Minimum Width = 1.75" (Minimum Height = 5.5") Maximum Width = 4.5" (Minimum Height = 3.25") Depth = 0.875" -
Optional Tether Included Cradle Dimensions: Minimum Width = 1.75" (Minimum Height = 5.5") Maximum Width = 4.5" (Minimum Height = 3.25") Depth = 0.875" -
The RAM-B-166-UN9U consists of a 3.3" diameter suction cup twist lock base, double socket arm, round base adapter and universal X-Grip clamping cradle for 10" tablets. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The X-Grip clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip clamping cradle expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip. The X-Grip cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. -
The RAM-B-166-UN8 consists of a 3.3" diameter suction cup twist lock base, STANDARD length double socket arm and universal spring loaded X-Grip cradle for 7"-8" tablets. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm; this with a twist of the arm knob, allows you can move the mount to your optimum viewing position. The spring loaded X-Grip cradle expands and contracts, allowing for a perfect custom fit of your 7"-8" tablet. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. -
The RAM-B-166-UN8U consists of a 3.3" diameter suction cup twist lock base, STANDARD length double socket arm and universal spring loaded X-Grip cradle for 7"-8" tablets. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm; this with a twist of the arm knob, allows you can move the mount to your optimum viewing position. The spring loaded X-Grip cradle expands and contracts, allowing for a perfect custom fit of your 7"-8" tablet. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. -
The RAM-B-189-PIV1-A-UN9U consists of a dual articulating 3.3" twist lock suction cup base, SHORT length double socket arm, and universal X-Grip cradle for 10" tablets. The dual articulating suction cup base is an amazing innovation in suction cup mounting. With the ability to independently articulate each suction cup, this mounting base can be used in a variety of applications such as curved windows and surfaces. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip cradle is compatible with devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. -
The RAM-B-189-PIV1-UN9-KRU consists of a dual articulating 3.3" twist lock suction cup base, double socket arm, and universal X-Grip cradle for 10" Tablets. The dual articulating suction cup base is an amazing innovation in suction cup mounting. With the ability to independently articulate each suction cup, this mounting base can be used in a variety of applications such as curved windows and surfaces. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip cradle is compatible with devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. -
The RAM-B-189-PIV1-UN9U consists of a dual articulating 3.3" twist lock suction cup base, double socket arm, and universal X-Grip cradle for 10" Tablets. The dual articulating suction cup base is an amazing innovation in suction cup mounting. With the ability to independently articulate each suction cup, this mounting base can be used in a variety of applications such as curved windows and surfaces. The X-Grip cradle is compatible with devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. -
The RAM-B-189-PIV1-UN11U consists of a dual articulating 3.3" twist lock suction cup base, double socket arm, and universal X-Grip cradle for 12" Tablets. The dual articulating suction cup base is an amazing innovation in suction cup mounting. With the ability to independently articulate each suction cup, this mounting base can be used in a variety of applications such as curved windows and surfaces. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip cradle is compatible with devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. -
The RAM-B-189-C-UN9U consists of a double 3.25" twist lock suction cup base, LONG double socket arm, round base adapter and universal X-Grip cradle for 10" tablets. The double suction cup base is designed to have an "EXTRA STRONG" hold on glass and non-porous plastic surfaces. The X-Grip cradle is compatible with devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. -
PRODUCT INFORMATION OVERVIEW The RAM-B-189-UN9-ALA1-KRU consists of a double 3.3" twist lock suction cup base, double socket arm, extended retention knob and universal X-Grip® cradle for 10" Tablets. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The RAM-B-189-UN9-ALA1-KRU expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip®. The X-Grip® cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. HARDWARE INCLUDED Assembly Hardware HOLDER DIMENSIONS Max Height: 10.25" (using optional supports not included) Width Range: 6.25" - 8.1" Max Depth: .875" SUCTION SIZE (2) 3.3" Diameter Bases, Total Width 7.95" SOCKET-TO-SOCKET LENGTH 3" BALL/SOCKET SIZE B Size (1") WEIGHT CAPACITY 2 lbs MATERIALS Powder coated steel Marine-grade aluminum High strength composite PACKAGING TYPE Poly Bag WEIGHT 2.5 lbs. -
PRODUCT INFORMATION OVERVIEW The RAM-B-189-UN8-ALA1-KRU consists of a double 3.3" twist lock suction cup base, STANDARD length double socket arm, easy access retention knob and universal spring loaded X-Grip® cradle for 7"-8" tablets. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The RAM-B-189-UN8-ALA1-KRU expands and contracts for perfect fit of most 7"-8" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip®. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. HARDWARE INCLUDED Assembly Hardware (1) Optional Tether (1) Glue Tube for Rubber Caps HOLDER DIMENSIONS Width Range: 2.5" - 5.75" Depth Range: .875" max SUCTION SIZE (2) 3.3" Diameter Bases, Total Width 7.95" SOCKET-TO-SOCKET LENGTH 3" BALL/SOCKET SIZE B Size (1") WEIGHT CAPACITY 2 lbs MATERIALS Powder coated steel Marine-grade aluminum High strength composite PACKAGING TYPE Poly Bag WEIGHT 1.57 lbs. -
The RAM-B-189B-C-UN9-225B consists of a double 3.25" twist lock suction cup base, LONG double socket arm, round base adapter and universal X-Grip cradle for 10" tablets. The double suction cup base is designed to have an "EXTRA STRONG" hold on glass and non-porous plastic surfaces. Included with this mount is an optional steel backing plate to reinforce any hard surface that this may drill up against, instead of the suction cup feature. The X-Grip cradle is compatible with devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. -
The RAM-B-400-C-UN8U consists of the Tough-Claw rail clamp base, LONG length double socket arm and universal spring loaded X-Grip cradle for 7"-8" tablets. The spring loaded X-Grip cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are easy access grip knobs for quick insertion and release of your handheld device. The Tough-Claw rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw can be clamped on rails from 0.625" - 1.5" outer diameter. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM Tough-Claw will soon become another essential RAM component in your collection of mounting options. The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. -
The RAM-B-400-C-UN9-ROTO1U consists of the Tough-Claw rail clamp base, STANDARD length double socket arm and universal spring loaded X-Grip cradle for tablets. The spring loaded X-Grip cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are easy access grip knobs for quick insertion and release of your handheld device. The Tough-Claw rail clamp base is the perfect mounting base for quick and easy toolless installation and removal on round, square, odd shaped rails and bars. The Tough-Claw can be clamped on rails from 0.625" - 1.5" outer diameter. Perfectly suited for mounting on the yoke of an aircraft, the handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM Tough-Claw will soon become another essential RAM component in your collection of mounting options. The RAM-B-400-C-UN9-ROTO1U comes equiped with Roto-View technology that lets you rotate your tablet up to 90 degrees for easy viewing in either portait or landscape mode. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. -
Take your mobile entertainment on the road with the new RAM Torque handlebar and rail mounting base. We've paired a B-sized 1" rubber ball base that accommodates bars 3/8" 5/8" in diameter with a B-sized standard length arm the dynamic X-Grip for 7"-8" tablets. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment. The spring loaded X-Grip cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. -
Take your mobile entertainment on the road with the new RAM Torque handlebar and rail mounting base. We've paired a B-sized 1" rubber ball base that accommodates bars 3/4" 1" in diameter with a B-sized standard length arm the dynamic X-Grip for 7"-8" tablets. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment. The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. -
Take your mobile entertainment on the road with the new RAM Torque handlebar and rail mounting base. We've paired a B-sized 1" rubber ball that accommodates bars 1 1/8" to 1 " in diameter with a B-sized standard length arm and the dynamic X-Grip for 7"-8" tablets. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment. The spring loaded X-Grip cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. -
The RAM-B-316-1-UN9 consists of the RAM POD I universal No-Drill vehicle base, 18" rigid aluminum rod, socket system and universal X-Grip clamping cradle for 10" tablets. The base of the mount connects to your seat rail without any drilling necessary. The 18" rigid aluminum rod can be bent to position your device to its optimum viewing location. The X-Grip clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip clamping cradle expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip. -
The RAM-B-316-1-UN8B consists of the RAM POD I universal No-Drill vehicle base, 18" rigid aluminum rod, socket system and universal spring loaded X-Grip cradle for 7"-8" tablets. The base of the mount connects to your seat rail without any drilling necessary. The 18" rigid aluminum rod can be bent to position your device to its optimum viewing location. The spring loaded X-Grip cradle expands and contracts, allowing for a perfect custom fit of your 7"-8" tablet. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. -
The RAM-B-316-1-UN11U consists of the RAM POD I universal No-Drill vehicle base, 18" rigid aluminum rod, socket system and universal X-Grip clamping cradle for 12" tablets. The base of the mount connects to your seat rail without any drilling necessary. The 18" rigid aluminum rod can be bent to position your device to its optimum viewing location. The X-Grip clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Gripclamping cradle expands and contracts for perfect fit of most 12" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip. The X-Grip cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. The RAM-HOL-UN11U is compatible with the iPad Pro WITHOUT CASE ONLY. -
The RAP-299-3-UN9U consists of the RAM-A-CAN cup holder base, double socket arm and universal X-Grip cradle. Included are support fins that flex and can be trimmed, making the cup holder base conform to most vehicle cup holders. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm, allowing for almost infinite adjustment and perfect viewing angles. The X-Grip cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Compatible with any vehicle cup holder with an inside diameter range of 2.57" to 3.5". Cradle Dimensions Minimum Width = 6.25" Maximum Width = 8.1" Depth = 0.875" Maximum Length (using additional supports) = 10.25" -
The RAP-299-3-UN8 consists of the RAM-A-CAN cup holder base, double socket system and universal spring loaded X-Grip cradle for 7"-8" tablets. The cup holder base includes a 6" flex mounting feature. A durable composite shell construction and soft fins that can be trimmed to fit makes the cup holder mount one of the most portable and versatile "Go Anywhere" products offered. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The included X-Grip cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip cradle expands and contracts, allowing for a perfect custom fit of your tablet. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip is the cell phone cradle evolved. The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Compatible with any vehicle cup holder with an inside diameter range of 2.57" to 3.5". Cradle Dimensions Minimum Width = 2.5" (Minimum Height = 7") Maximum Width = 5.75" (Minimum Height = 4") Depth = 0.875" -
The RAP-299-3-UN8U consists of the RAM-A-CAN cup holder base, double socket system and universal spring loaded X-Grip cradle for 7"-8" tablets. The cup holder base includes a 6" flex mounting feature. A durable composite shell construction and soft fins that can be trimmed to fit makes the cup holder mount one of the most portable and versatile "Go Anywhere" products offered. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The included X-Grip cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip cradle expands and contracts, allowing for a perfect custom fit of your tablet. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip is the cell phone cradle evolved. The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Compatible with any vehicle cup holder with an inside diameter range of 2.57" to 3.5". Cradle Dimensions Minimum Width = 2.5" (Minimum Height = 7") Maximum Width = 5.75" (Minimum Height = 4") Depth = 0.875" -
The RAP-299-3-UN11U consists of the RAM-A-CAN cup holder base, double socket arm and universal X-Grip cradle. Included are support fins that flex and can be trimmed, making the cup holder base conform to most vehicle cup holders. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm, allowing for almost infinite adjustment and perfect viewing angles. The X-Grip cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Compatible with any vehicle cup holder with an inside diameter range of 2.57" to 3.5". Cradle Dimensions Minimum Width = 7.25" Maximum Width = 8.75" Maximum Length (WITHOUT additional supports) = Unlimited Maximum Length (WITH additional supports) = 10.25" Depth = 0.875" The RAM-HOL-UN11U is compatible with the iPad Pro WITHOUT CASE ONLY. -
The RAM-B-367-UN7U consists of a motorcycle handlebar clamp base with M8 threads, double socket arm and universal X-Grip cradle. This mount will replace one of the M8 bolt heads on your handlebar clamp system, positioning your device clean in the center. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The spring loaded X-Grip cradle expands and contracts, allowing for a perfect custom fit of your 7"-8" tablet. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. -
The RAP-B-378-UN8 consists of a flex adhesive base with 1" ball, double socket arm and universal spring loaded X-Grip cradle for 7"-8" tablets. Using a PSA stick pad, put the flex adhesive mount practically anywhere you want to keep your portable electronics easy to see and always within your reach. Designed with a very small foot print, finding a home on your scooter, motorcycle, kayak, boat or vehicle dash is easy. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The spring loaded X-Grip cradle expands and contracts, allowing for a perfect custom fit of your 7"-8" tablet. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. -
The RAP-B-378-UN8U consists of a flex adhesive base with 1" ball, double socket arm and universal spring loaded X-Grip cradle for 7"-8" tablets. Using a PSA stick pad, put the flex adhesive mount practically anywhere you want to keep your portable electronics easy to see and always within your reach. Designed with a very small foot print, finding a home on your scooter, motorcycle, kayak, boat or vehicle dash is easy. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The spring loaded X-Grip cradle expands and contracts, allowing for a perfect custom fit of your 7"-8" tablet. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. -
Sometimes, it's all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip is the cell phone cradle evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant cradle is ready to compliment your phone and become the most useful accessory in your vehicle. The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. -
Sometimes, it's all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip is the cell phone cradle evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant cradle is ready to compliment your phone and become the most useful accessory in your vehicle. The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. -
OVERVIEW
The popular spring-loaded RAM® X-Grip® phone holder features an 'X' design that expands and contracts to provide a perfect fit for your device – even if it's in a case. Made of high-strength composite and stainless steel, the RAM® X-Grip® phone holder is compatible with a wide variety of RAM® double socket arms and mounting bases. This version of the RAM® X-Grip® fits phones ranging from 1.87" to 3.25" in width and keeps your device completely functional and accessible. No matter what double socket arm and mounting base you pair the RAM® X-Grip® with, RAM® ball and socket technology allows for near-infinite adjustability to achieve the ideal viewing angle – while also extending the life of your phone by providing shock and vibration damping. For outdoor applications – like being used as a motorcycle phone mount – the RAM® X-Grip® includes a device tether that is recommended for added security and peace of mind.HARDWARE INCLUDED
(1) Optional Tether (1) Glue Tube for Rubber CapsHOLDER DIMENSIONS
Width Range: 4.76cm - 8.25cm (1.875" - 3.25") Depth Range: 2.22cm (.875") maxBALL/SOCKET SIZE
B Size (1")WEIGHT CAPACITY
900g (2 lbs)MATERIALS
High strength composite Stainless steelPACKAGING TYPE
Poly BagWEIGHT
0.22 lbs.ADDITIONAL INFORMATION
FEATURES
- Spring-loaded 'X' design with rubber caps sports great holding power without hiding your phone; includes optional device tether for peace of mind during rugged use
- Compatible with any B size RAM Mounts double socket arm; ball and socket technology allows for near-infinite adjustability
- Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments
- Backed by a lifetime warranty
-
Description
Instructions: Large RAM® X-Grip® Assembly GuideThe RAM-HOL-UN9U consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The RAM-HOL-UN9U expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip®. The X-Grip® cradle is compatible with tablets devices that will fit the dimensions listed below. It is important to verify the dimensions of your tablet with a case/sleeve/skin when determining the overall size. Cradle Dimensions: Minimum Width = 6.25" (15.87cm) Maximum Width = 8.1" (2-.57cm) Depth = 0.875" (2.22cm) Maximum Length (using additional supports) = 10.25" (26.03cm) however it is not necessarily a requirement to use both supports.Features: 1. Spring loaded cradle expands and contracts for perfect fit of your tablet 2. Rubber coated tips will hold your tablet firm and stable 3. Versatility of cradle allows for attachment to many 1" socket mounts 4. Socket technology allows for multiple adjustment angles and articulation of your tablet 5. Easy access grip knobs, located on the back of the cradle for quick release of your tablet 6. Multiple mounting access points on the back of the cradle 7. Additional support keeper at the bottom of the cradle 8. Full access to all ports 9. Lifetime warranty Material: Marine Grade Stainless Steel Components & High Strength Composite -
The RAM-HOL-UN8B-201U consists of a STANDARD length double socket arm and universal X-Gripclamping cradle for 7"-8" tablets. The double socket arm is 3.69" in length and will accept all RAM 1" diameter ball bases. The spring loaded X-Grip cradle expands and contracts, allowing for a perfect custom fit of your 7"-8" tablet. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Cradle Dimensions Minimum Width = 2.5" (Minimum Height = 7") Maximum Width = 5.75" (Minimum Height = 4") Depth = 0.875" -
The RAM-HOL-UN8BCU consists of a spring loaded cradle and 1.5" rubber ball connected to the back of the base. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The RAM-HOL-UN8BCU expands and contracts for perfect fit of most 7"-8" tablets. The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Cradle Dimensions Minimum Width = 2.5" (Minimum Height = 7") Maximum Width = 5.75" (Minimum Height = 4") Depth = 0.875" -
FEATURES- Spring-loaded 'X' design with rubber caps sports great holding power without hiding your tablet; fits most 7"-8" tablets and includes optional device tether for peace of mind during rugged use
- Easy access grip knobs on the back of the holder allow for the quick release of your tablet
- Includes 1" B size rubber ball compatible with any B size RAM® Mounts double socket arm; ball and socket technology allows for near-infinite adjustability
- Backed by a lifetime warranty
HARDWARE INCLUDED
(1) Optional Tether
(1) Glue Tube for Rubber Caps
HOLDER DIMENSIONS
Width Range: 2.5" - 5.75"
Depth Range: .875" max
BALL/SOCKET SIZE
B Size (1")
WEIGHT CAPACITY
2 lbs
MATERIALS
High strength composite
Stainless steel
PACKAGING TYPE
Poly Bag
WEIGHT
0.38 lbs. -
The RAM-HOL-UN11U is just what you've been looking for to hold your favorite tablet. Just like the devices it was made for, it is everything you need and nothing you don't. This cradle by RAM consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Simple to open and close, the spring loaded RAM X-Grip leaves the outside edge of your tablet almost completely free of annoying obstructions. Soft rubber fingers apply just enough force to keep your tablet in safe and secure. Compatible with a wide range of mounting solutions, your tablet is sure to find a home no matter where your travels take you. The X-Grip cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Cradle Dimensions Minimum Width = 7.25" Maximum Width = 8.75" Maximum Length (WITHOUT additional supports) = Unlimited Maximum Length (WITH additional supports) = 10.25" Depth = 0.875" The RAM-HOL-UN11U is compatible with the iPad Pro WITHOUT CASE ONLY. -
The RAM-B-138-UN8 consists of a 2.5" diameter round base with the universal AMPS hole pattern, double socket arm and universal X-Gripclamping cradle for 7"-8" tablets. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The spring loaded X-Grip cradle expands and contracts, allowing for a perfect custom fit of your 7"-8" tablet. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. -
The RAM-B-138-UN8 consists of a 2.5" diameter round base with the universal AMPS hole pattern, double socket arm and universal X-Gripclamping cradle for 7"-8" tablets. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The spring loaded X-Grip cradle expands and contracts, allowing for a perfect custom fit of your 7"-8" tablet. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. -
RAM's X-Grip is one of the best-selling, most trusted device mounts on the market. The X-Grip provides simple mounting and a secure hold for phones and tablets of all sizes. Under extreme environments, you can ensure added piece-of-mind with RAM's X-Grip Tether. The X-Grip Tether is recommended for out-of-cockpit applications where excessive wind and G-force could cause movement of the device within the holder. It's also great if you just want a little added stability and vibration control when capturing video from the mount. The Tether is made of high-strength elastomeric material and fits around the X-Grip holder for easy device insertion. -
RAM's X-Grip is one of the best-selling, most trusted device mounts on the market. The X-Grip provides simple mounting and a secure hold for phones and tablets of all sizes. Under extreme environments, you can ensure added piece-of-mind with RAM's X-Grip Tether. The X-Grip Tether is recommended for out-of-cockpit applications where excessive wind and G-force could cause movement of the device within the holder. It's also great if you just want a little added stability and vibration control when capturing video from the mount. The Tether is made of high-strength elastomeric material and fits around the X-Grip holder for easy device insertion. -
RAM's X-Grip is one of the best-selling, most trusted device mounts on the market. The X-Grip provides simple mounting and a secure hold for phones and tablets of all sizes. Under extreme environments, you can ensure added piece-of-mind with RAM's X-Grip Tether. The X-Grip Tether is recommended for out-of-cockpit applications where excessive wind and G-force could cause movement of the device within the holder. It's also great if you just want a little added stability and vibration control when capturing video from the mount. The Tether is made of high-strength elastomeric material and fits around the X-Grip holder for easy device insertion. -
The RAP-B-104-UN9-ALA1-KRU consists of a 2" x 2.5" rectangle base, SHORT length double socket arm, extended retention knob and universal X-Grip clamping cradle for 9"-10" tablets. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; allowing for almost infinite adjustment and perfect viewing angles. The X-Grip clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip clamping cradle expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip. X-Grip Dimensions: Minimum Width = 6.25" Maximum Width = 8.1" Depth = 0.875" Maximum Length (using additional supports) = 10.25" -
The RAP-UN-CAP-4U consists of (4 qty) post caps that are an accessory for all RAM X-Grip cradles and mounts. Optional super glue is included to offer extra security of the rubber caps on your RAM X-Grip.
